Table of Contents
Advertisement
Item
Options
Serial ATA Port 0
Serial ATA Port 1
Item
Options
Automatic Thermal Reporting
Disabled
Enabled*
Shut Down Temperature
Throttle On Temperature
TC1
Serial ATA Port sub-submenus
The Serial ATA Port sub-submenus allow you to configure settings for each mass
storage device installed in the Matrox 4Sight GPm unit.
Meaning
These items report information about the SATA devices connected to the individual SATA ports. If there is no
SATA device connected to an individual port, it is reported as [Not Installed].
If there is a SATA device connected to a port, the name of the device is reported.
Port 0 is the normal SATA connector.
Port 1 is the mSATA connector.
Thermal Configuration submenu
The Thermal Configuration submenu allows you to configure thermal settings
for the unit.
Platform Thermal Configuration sub-submenu
The Platform Thermal Configuration sub-submenu allows you to configure
thermal settings, such as temperature thresholds.
Meaning
This item allows you to set whether the Shut Down Temperature and Throttle On Temperature items
are configured automatically. By selecting Disabled, you can configure these options manually.
This item allows you to set the critical temperature trip point, in Celsius. The operating system will shut
down when one or more of the CPUs reach this temperature.
This item only appears when Automatic Thermal Reporting is set to Disabled.
This item allows you to set the temperature of the CPUs, in Celsius, at which the operating system will
activate CPU throttling using the TC1, TC2, and TSP items.
This item only appears when Automatic Thermal Reporting is set to Disabled.
This item allows you to set the thermal constant TC1 for the Advanced Configuration and Power
Interface (ACPI) Passive Cooling (CPU Throttle On) formula:
P[%] = TC1 * (T
- T
n
where P[%] is the CPU performance change
T
is the current CPU temperature
n
T
is the target CPU temperature
t
The operating system uses this formula to determine the reduction in power consumption necessary
for a decrease in the unit's temperature.
) + TC2 * (T
- T
)
n-1
n
t
Advanced menu
97
Advertisement
Table of Contents
