Table of Contents
Advertisement
Item
Options
SCU resolution
640 x 480
800 x 600
1024 x 768*
Numlock
Off
On*
Device Detection Delay
Disabled*
250 ms
500 ms
1 s
2 s
Item
Options
Serial Port A Mode
RS-232*
RS-485
Azalia
Disabled
Enabled*
Boot Configuration submenu
The Boot Configuration submenu allows you to configure boot settings.
Meaning
This item allows you to change the resolution of the setup utility.
This item allows you to turn NumLock mode on and off. The state of Numlock mode determines whether the
numeric keys or the cursor (arrow) keys on the keypad are active after bootup.
The On option causes the numeric keys on the keypad to be active. The Off option causes the arrow keys on
the keypad to be active.
Note that this item is only an initial setting. After bootup, you can activate or deactivate the numeric keys on
the keypad by pressing the numlock key on the keyboard.
These items allow you to set a delay when detecting devices from which to boot. Matrox 4Sight GPm will
wait a set amount of time before attempting to detect devices.
Peripheral Configuration submenu
The Peripheral Configuration submenu allows you to configure the controllers
related to various peripheral devices that are connected to Matrox 4Sight GPm.
Meaning
This item allow you to select the mode of Serial port A.
This item allows you to enable or disable the Intel High Definition Audio (HDA) controller.
By selecting Disabled, the audio controller will always be disabled.
By selecting Enabled, the audio controller will always be enabled.
Advanced menu
95
Advertisement
Table of Contents
