Table of Contents
Advertisement
Item
Options
Quiet Boot
Enabled*
Disabled
Network Stack
Disabled*
Enabled
PXE Boot Capability
Disabled*
UEFI: IPv4
UEFI: IPv6
UEFI: IPv4/IPv6
Legacy
Add Boot Options
First
Last
Auto*
ACPI Selection
Acpi1.0B
Acpi3.0
Acpi4.0
Acpi5.0*
Boot
Enabled*
Disabled
EFI/Legacy Device Order
EFI device first
Legacy device first
Smart Mode*
Meaning
This item allows you to boot in text mode.
By selecting Enabled, the BIOS will display a full-screen logo on boot-up. The normal POST messages will be
hidden.
By selecting Disabled, the BIOS will display the POST messages, instead of the logo. This option decreases
the time required to boot the unit.
This item allows you to enable or disable loading instructions from a PXE device that contains pre-boot
execution environment (PXE) instructions that enable your unit to boot from your network. By selecting
Enabled, the PXE device requests an IP address (from a DHCP server on your network) and downloads an
operating system (a kernel, using FTP from a server on your network), and then boots your
Matrox 4Sight GPm (Bay Trail) using the downloaded operating system.
Additional steps are required to boot your Matrox 4Sight GPm (Bay Trail) from a network device. Once this
item is enabled, you must save the BIOS settings, reboot, and then re-enter the BIOS settings and verify that
the network device is the first in the list of potential boot devices in the Boot menu. If it is not, set it as the first
device, save the BIOS settings, and reboot.
This item allows you to set the PXE: UEFI (Unified Extensible Firmware Interface) or Legacy.
This item is only configurable when Network Stack is set to Enabled.
This item allows you to set where in the boot order newly detected devices will be placed.
By selecting First, a newly detected device will be placed first in the boot order.
By selecting Last, a newly detected device will be placed last in the boot order.
By selecting Auto, a newly detected device will be automatically placed in the boot order.
This item allows you to set the version of the Advanced Configuration and Power Interface (ACPI) to use.
This item allows you to enable or disable booting from a USB device.
This item allows you to set whether to try to boot first from an EFI device. On Matrox 4Sight GPm (Bay Trail),
there is at least one EFI device available: the flash memory device on which the BIOS is stored. If booting
from this device, the internal EFI shell is used to boot.
By selecting EFI device first, the operating system will try to boot first from an EFI device.
By selecting Legacy device first, the operating system will try to boot first from a legacy device.
By selecting Smart mode, the BIOS choses automatically which device to boot first.
Boot menu
153
Advertisement
Table of Contents
