Com A/Com B Isa Serial Dev Sub-Submenu - Matrox 4Sight GPm Installation And Hardware Reference

Item
Options
PortEnabled
Enabled
Disabled*
UseGlobalSetting
Enabled*
Disabled
Terminal Type
VT_100*
VT_100+
VT_UTF8
PC_ANSI
Baud Rate
115200*
57600
38400
19200
9600
4800
2400
1200
Data Bits
7 Bits
8 Bits*
Parity
None*
Even
Odd

COM A/COM B ISA Serial Dev sub-submenu

The COM A/COM B ISA Serial Dev sub-submenu allows you to configure the
communication between the unit's COM A or COM B serial port and your
remote computer's terminal-emulation program.
❖ Note that the settings of your terminal-emulation program running on your
remote computer must match the following console serial redirection settings to
permit communication with your unit.
Meaning
This item allows you to enable the serial port.
This item allows you to specify that this serial port will take its settings from the Console Redirection Setup
submenu.
This item allows you to set the terminal type to emulate.
This item allows you to set the baud rate.
This item allows you to set the number of data bits per character that are sent or received by the COM port.
This item allows you to set whether character data is sent or received with a parity bit and how the parity bit
is set. The parity bit is an extra data bit (o or 1) that is added to each character for error-checking purposes.
Advanced menu 145