Security Menu - Matrox 4Sight GPm Installation And Hardware Reference

148 Appendix D: Matrox 4Sight GPm (Bay Trail) BIOS reference
Item
Options
Supervisor Password
Set Supervisor Password
Enter

Security menu

This section describes all the items of the Security menu. This menu allows you
to set up or change the supervisor password. The supervisor password can protect
the BIOS Setup Utility.
Security
Main Main Advanced Advanced Security Security
Supervisor Password
Set Supervisor Password
F1 F1 Help
Esc Esc Exit
Refer to the section entitled The Legend window for guidelines on navigating
within this menu.
Meaning
This item reports the status of the supervisor password: Installed or Not Installed. Installed means that a
supervisor password has been established. Use the Set Supervisor Password item to create, change, or
uninstall the password.
This item allows you to create the supervisor password (if you haven't created it yet), change the
previously-existing supervisor password, or uninstall the supervisor password.
If you want to uninstall the supervisor password, select the Set Supervisor Password item, and press the
Enter key when prompted for a new password.
You must save all changes and exit the BIOS Setup Utility to permanently change the supervisor password;
you can do this by pressing the F10 key.
InsydeH20 Setup Utility
Power Power Boot Boot Exit Exit
Not Installed
F5/F6 F5/F6
Select Item
Select Menu Enter Enter
Install or Change the password
and the length of password must
be greater than one character.
Change values F9 F9 Setup Defaults
Select Submenu F10 F10 Save and Exit
Rev 5.0