Table of Contents
Advertisement
22 Chapter 1: Before you begin
Additional components
You can also purchase the following additional components from Matrox Imaging.
Additional component
Video cables
Matrox 4Sight GPm power supply
with an open-wire cable
Contact your Matrox sales representative for availability.
General warnings
To avoid damaging the Matrox 4Sight GPm motherboard, follow these
precautions.
• The unit must be placed in a restricted access location when operating in an
ambient temperature above 45° C.
• To ensure EMC conformity, connect the chassis ground pin of your Matrox 4Sight
GPm unit to earth.
• In environments where your Matrox 4Sight GPm is subjected to vibrations,
connect your third-party device to your unit using locking cables.
Description
These cables are used to connect video sources to Matrox frame
grabber boards.
This 24 V power supply with an open-wire cable connects to the power
connector of your unit. Note that the power connector latch is already
connected to the open-wire cable of the power supply.
Advertisement
Table of Contents
