Table of Contents
Advertisement
32 Chapter 2: Getting started with your Matrox 4Sight GPm unit
Warning
Connecting video output display devices
You can connect up to two video output display devices to the Matrox 4Sight GPm
unit:
• You can connect a high-resolution analog display device (such as an analog
monitor or an analog flat panel) to the DVI-I connector using a DVI-to-VGA
(DBHD-15) adapter.
• You can connect a high-resolution digital display device (such as digital flat panel)
to each of the DVI connectors. To do so, use the cable provided with your display
device.
Connecting a device
You can connect a -compliant mouse, keyboard, mass storage device, or printer.
To do so, connect a cable with a USB type A connector to one of the USB
connectors, located on the back panel of the chassis.
❖ Note that USB hubs can also be used to connect multiple USB devices to the
Matrox 4Sight GPm unit.
In environments where your Matrox 4Sight GPm is subjected to vibrations,
connect your third-party device to your unit using locking cables.
Advertisement
Table of Contents
