Table of Contents
Advertisement
3. Using the Up and Down arrow keys, select the device from which you will load
the operating system.
4. When the device is selected, press the Enter key.
This will override the existing boot sequence (saved in the BIOS Setup Utility)
for this boot only, and the operating system will be booted using the selected
device.
If the BIOS cannot find the selected device, an error message will be generated.
If the operating system cannot be loaded from the selected device, the BIOS will
revert to the boot sequence saved in the BIOS Setup Utility.
5. To exit the Boot Manager utility and return to the front page screen, press the Esc
key.
Overriding the boot-device sequence
123
Advertisement
Table of Contents
