Table of Contents
Advertisement
Item
Options
Baud Rate
115200*
57600
38400
19200
9600
4800
2400
1200
Data Bits
7 Bits
8 Bits*
Parity
None*
Even
Odd
Stop Bits
1 Bit*
2 Bits
Flow Control
None*
RTS/CTS
XON/XOFF
Meaning
This item allows you to set the baud rate.
This item allows you to set the number of data bits per character that are sent or received by the COM port.
This item allows you to set whether character data is sent or received with a parity bit and how the parity bit
is set. The parity bit is an extra data bit (o or 1) that is added to each character for error-checking purposes.
This item allows you to set the number of extra data bit(s) (1 or 2) that are added to each character to
indicate the end of the character.
This item allows you to set the signal to use to pause and resume the transmission of data.
By selecting None, no flow control is performed.
By selecting RTS/CTS, the serial port will send a request to send (RTS) signal. If the line is clear, the
connected device sends a clear to send (CTS) signal. Once received, your unit will begin transmitting data.
By selecting XON/XOFF, the connected device will send a transmitter-on (XON) signal. As its buffers get full,
it will send a transmitter-off (XOFF) signal to your unit - which will stop transmitting. When it is ready to
receive again, the connected device will send a transmitter-on (XON) signal.
Advanced menu
107
Advertisement
Table of Contents
