Table of Contents
Advertisement
Item
Options
Power Over Ethernet Port1
Power Over Ethernet Port2
Disabled*
Enabled
Power Over Ethernet Delay
Item
Options
Logo & SCU Resolution
Auto
640 X 480
800 x 600
1024 x 768*
Multi EDID Support
Disabled*
Enabled
PAVC
Disabled
LITE mode*
SERPENT mode
GTT Size
1 Mbytes
2 Mbytes*
Aperture Size
128 Mbytes
256 Mbytes*
512 Mbytes
Meaning
This item allows you to enable Power Over Ethernet (PoE) for each of the Ethernet ports that support it.
This item is only visible when Power Over Ethernet is set to Enabled.
❖
This item allows you set the delay (in msecs) before enabling Power Over Ethernet (PoE) after the unit boots.
This item is only visible when Power Over Ethernet is set to Enabled.
❖
Video Configuration submenu
The Video Configuration submenu allows you to control settings related to the
display.
Meaning
This item allows you to specify the resolution of the front page and the system configuration utility.
This item allows you to enable or disable extended display identification data (EIDID) to be sent to multiple
monitors from the system configuration utility.
This item should not be changed.
❖
This item allows you to specify the protected audio video control mode.
By selecting LITE mode, copy-protected audio video content can be displayed. This is sufficient for most
applications.
By selecting SERPENT mode, an advanced copy-protection identification scheme is used. This BIOS option
should be set only if your application recommends it.
This item allows you to select the size of the graphics translation table (GTT), in Mbytes.
This item should not be changed.
❖
This item allows you to select the aperture size, in Mbytes. The aperture size is the amount of PCI memory
allocated by the BIOS for the integrated graphics controller.
This item should not be changed.
❖
Advanced menu
139
Advertisement
Table of Contents
