Table of Contents
Advertisement
112 Appendix C: Matrox 4Sight GPm (Ivy Bridge) BIOS reference
Item
Options
Auto Wake on S5
Disabled*
By Every Day
Wake on S5 Time
By Day of Month
Wake on S5 Time
Day of Month
Wake on LAN
Disabled
Enabled*
Power menu
This section describes all the items of the Power menu. Refer to the section entitled
The Legend window for navigation guidelines.
Meaning
This item allows you to set a timer that will boot the operating system from S5 sleep mode. Both Auto Wake
on S5 and Wake on LAN are useful for booting Matrox 4Sight GPm remotely. For example, you can use Auto
Wake on S5 to boot Matrox 4Sight GPm every day at the same time to run your application (the application
would have to be scheduled to run with the Scheduled Tasks program in Windows).
By selecting Disabled, this timer will be disabled.
By selecting By Every Day, the operating system will boot automatically at the same time each day. Once you
have selected By Every Day, press the Down arrow to select Wake on S5 Time.
The time is entered in HH:MM:SS format.
• To alternate between fields, press the Enter key.
• To increase the value of each field by 1, press the + key.
• To decrease the value of each field by 1, press the - key.
You can also set the hour, minute, and second fields by typing in their values.
By selecting By Day of Month, the operating system will boot automatically at the same time, on the same
day of the month, every month. You can set the time at which you would like the operating system to boot, as
explained above, for By Every Day.
To set the day of the month, select Day of Month, and use the + and - keys to set the number between 0 and
31. When the number is set to 31 and the current month has fewer than 31 days, the operating system will
boot on the last day of the month.
This item allows you to enable or disable waking on LAN.
By selecting Disabled, the operating system will not wake up if a message is sent over LAN.
By selecting Enabled, the operating system will wake up from hibernation or sleep mode if it receives a
message sent over the network. This message must be a packet that contains 6 bytes of FFh (FF in
hexadecimal) followed by 16 copies of Matrox 4Sight GPm's Ethernet address.
Advertisement
Table of Contents
