Table of Contents
Advertisement
Item
Options
Internal Graphics Device
Auto*
Enabled
Disabled
RC6 (Render Standby)
Disabled
Enabled*
Deep Render Standby
Disabled
Enabled*
IGD - GTT Size
1 Mbytes
2 Mbytes*
IGD - Aperture Size
128 Mbytes
256 Mbytes*
512 Mbytes
Video Configuration submenu
The Video Configuration submenu allows you to access the Internal Graphic
Device sub-submenu. This sub-submenu allows you to control settings related to
the display.
Internal Graphic Device sub-submenu
The Internal Graphic Device sub-submenu allows you to configure the integrated
graphics controller.
Meaning
This item allows you to enable or disable the integrated graphics controller.
This item allows you to enable or disable render standby.
By selecting Enabled, the amount of power sent to the integrated graphics controller will be reduced when the
computer goes into sleep state.
By selecting Disabled, the amount of power sent to the integrated graphics controller will not be reduced
when the computer goes into sleep state.
This item allows you to enable or disable deep render standby.
Deep render standby is not affected by the setting in RC6 (Render Standby). If both items are set to Enabled,
Deep Render Standby will be used.
By selecting Enabled, the amount of power sent to the integrated graphics controller will be reduced further
than with RC6 render standby) when the computer goes into sleep state.
By selecting Disabled, the amount of power sent to the integrated graphics controller will not be reduced
when the computer goes into sleep state.
This item allows you to select the size of the graphics translation table (GTT), in Mbytes.
This item should not be changed.
❖
This item allows you to select the aperture size, in Mbytes. The aperture size is the amount of PCI memory
allocated by the BIOS for the integrated graphics controller.
Advanced menu
99
Advertisement
Table of Contents
