Pro20 Sensor Mounting Hardware - Teledyne ADFM Pro20 Installation And Operation Manual


ADFM® Flow Meter
Section 2 Setup and Installation
Figure 2-41 Threaded couplers: break off at joint
2.6.8 Pro20 Sensor
Mounting Hardware
2-38
3. Break off any excess length from the threaded couplers
(Figure 2-41) such that the remaining threads attach the
sensor snugly into the fairing.
Table 2-1 List of Pro20 Sensor Mounting Accessories
Cable mounting kit - Pro20 sensor only
Cable mounting kit - Pro20 & pressure sensor
Single SST Loop - Pro20 sensor only
Single SST Loop - Pro20 & pressure sensor
Scissors Ring standard sensor mounting hardware kit
Scissors Ring secondary sensor mounting hardware kit
Sensor mounting plate
Sensor mounting screws
Debris fairing
Spacer, 1 inch lift
Spacer, 2 inch lift
Spacer, 4 inch lift
Threaded coupler
Replacement hardware kit for fairing/spacer
60-7709-003
60-7709-002
489-0016-23
489-0016-25
60-3004-178
60-7709-001
60-7613-003
231-8116-10
60-7004-042
60-7004-043
60-7004-044
60-7004-045
60-7614-001
60-7619-001