ADFM® Flow Meter
Section 2 Setup and Installation
2.10.3 Canister Controller
Batteries
Figure 2-59 Canister: remove battery compartment lid
Figure 2-60 Remove battery retaining cover and screw
2-54
To install the four lantern batteries:
1. Unscrew the four eye bolts on the canister's suspension
end, taking care not to lose the washers and the black
o-ring seal around the base of the lid.
Unscrew suspension
bolts (4)
2. Remove the butterfly screw and battery retaining cover.
Butterfly screw
Retaining cover