Teledyne ADFM Pro20 Installation And Operation Manual page 27

Data
Figure 2-6 Flowlink Data tab
The rate of data storage and adjustment of the number of
velocity readings within a data storage interval can be set in the
Data storage box. For the most possible velocity readings within
an interval, check the box next to "Use Mode 12 Sampling."
Manage the data type(s), form of output, and amount of data
stored in the Data Format box.
Note
For complete information on programming and data retrieval,
refer to the Flowlink software manual and Help files.
ADFM® Flow Meter
Section 2 Setup and Installation
2-7