Table of Contents
Advertisement
ADFM® Flow Meter
Appendix B Material Safety Data Sheets
Multisorb Technologies, Inc.
Section 5 – Fire Fighting Measures
Flammable Properties:
Flash Point:
Flammable Limits:
Lower Flammability Limit: Not applicable
Upper Flammability Limit: Not applicable
Autoignition Temperature:
Hazardous Combustion Products:
Extinguishing Media:
Fire Fighting Instructions:
Unusual Fire and Explosion Hazards:
Section 6 – Accidental Release Measures
Spill:
Sweep or vacuum up and place the spilled material in a waste disposal container. Avoid raising dust.
Wash with soap and water after handling.
Section 7 – Handling and Storage
Handling:
Storage:
Section 8 – Exposure Controls/Personal Protection
Engineering Controls:
Respiratory Protection: Not required.
Skin Protection:
Eye Protection:
Component Name
Silica gel
Cobalt chloride
Aluminum
B-8
Drican® (Indicating Silica Gel – Al Case )
Not flammable
Not applicable
Not flammable
Not applicable
Not applicable
Use extinguishing media that is appropriate for the surrounding fire. The silica gel
and the aluminum case are not combustible.
The silica gel and the aluminum case are not combustible.
None
Avoid raising dust and minimize the contact between worker and the material. Practice
good hygienic work practices.
Store in a cool, dry location. Keep in sealed containers away from moisture. The silica gel
will readily adsorb moisture.
Not required.
Not required.
Not required.
Exposure Limits
OSHA
PEL
TWA 20 mppcf
3
(80 mg / m
% SiO
3
.1 mg / m
(cobalt metal dust & fume)
3
TWA 15 mg / m
(total
dust)
3
TWA 5 mg / m
(respirable fraction)
July 21, 2008
Method:
ACGIH
TLV
Not applicable
)
2
3
TWA .02 mg / m
(as cobalt)
(Cobalt metal dust & fume as cobalt)
3
1 mg / m
(respirable
fraction of
TWA 5 mg / m
aerosol)
Page 2 of 4
Not applicable
Other Recommended Limits
NIOSH REL
3
TWA 6 mg / m
3
IDLH 3000 mg / m
NIOSH REL
3
TWA .05 mg / m
3
IDLH 20 mg / m
(as metal dust & fume as cobalt)
NIOSH REL TWA
3
10 mg / m
(total dust)
3
(respirable fraction)
Advertisement
Table of Contents
Troubleshooting
