Table of Contents
Advertisement
ADFM® Flow Meter
Section 2 Setup and Installation
2.14 WinADFM
Figure 2-69 Connect Screen
2-62
To begin downloading data from the ADFM through direct-con-
nection:
1. Connect the computer to the ADFM flow meter with the
communication interface cable.
2. Start WinADFM software.
3. Select File > Open.
4. Select the appropriate Station file (.stn file).
5. Select ADFM > Operate.
6. Click Connect (Figure 2-69).
7. Select Collect Data.
Advertisement
Table of Contents
Troubleshooting
