Table of Contents
Advertisement
ADFM® Flow Meter
Section 1 Introduction
Table 1-2 Technical Specifications: Pro20 Open Channel Velocity Sensor
Sensor Body
Operating Temperature
Housing Material
Static Pressure
Dimensions
Weight
Beam Angles
Sensor Signal Cable
Operating Temperature
Material
Length
Minimum Bend Radius
Outer Diameter
Table 1-3 Technical Specifications: Hot Tap Insertion Velocity Sensor
Sensor Body
Operating Temperature
Housing
Static Pressure
Dimensions:
Sensor Head Diameter
b
Std stem length
Insertion
Weight (includes 50 ft. cable)
Beam Angles
Sensor Signal Cable
Operating Temperature
Material
Length
Minimum Bend Radius
Outer Diameter
a. Use safety installation kit (60-7007-030) for pressures above 100psi. Applications with pressures between 200 and 300
psi require a schedule 80 nipple (contact factory).
b. Custom stem lengths are available; call factory for more information.
c.
Custom cable lengths are available; call factory for more information.
1-4
23 to 95 °F (-5 to 35 °C)
Urethane
250 psi nominal
8 x 3 x 1.5 inches (200 x 75 x 40 mm)
3.2 lbs (1.5 kg)
1 & 3: 10°front-back; 20°to side
2 & 4: 20° front-back; 30° to side
-40 to 125 °F (-40 to 52 °C)
Polyethyline jacket
50 ft (15 m) std.
100 ft (30 m) and 150 ft. (45 m) optional lengths available
6 in (150 mm)
0.5 in (13 mm) nominal
23 to 95 °F (-5 to 35 °C)
Plastic transducer assembly on corrosion resistant stainless steel stem.
Rated NEMA 6P, IP68, defined as validated for submersion to 20 feet of depth
for 48 hours.
a
200 psi nominal
1.375 in. (35 mm)
2 feet (610 mm)
Fits 2 inch NPT (50 mm) standard tap
15 lbs (6.8 kg)
1 & 3: 10°front-back; 20° to side
2 & 4: 20° front-back; 30° to side
-40 to 140 °F (-40 to 60 °C)
Polyethylene jacket
50 ft (15 m) std; 100 ft (30 m) optional
6 in (150 mm)
0.5 in (13 mm) nominal
c
Advertisement
Table of Contents
Troubleshooting
