Viewing The Data - Teledyne ADFM Pro20 Installation And Operation Manual


ADFM® Flow Meter
Section 2 Setup and Installation

2.14.1 Viewing the Data

Figure 2-72 ADFM Data window
2-64
When the download is finished, erase the recorder by clicking
Erase Data.
8. When finished, restart the ADFM by doing one of the fol-
lowing:
a. Click Restart to keep current program settings.
b. Click Program & Go to save new program settings.
When the Program & Go screen appears, click Exit.
9. Disconnect the communication interface cable from the
ADFM, exit the Operate screen, and quit the WinADFM
software program.
To view the downloaded data, start WinADFM and open the
desired Station file. Select Display, then Data.
The data files available for viewing will appear in the Data
window (Figure 2-72). Click the data file to view and select the
viewing mode from the column of buttons on the right. For
example, selecting Expert View would result in a view similar to
Figure 2-73.
Exit WinADFM when finished.