Teledyne ADFM Pro20 Installation And Operation Manual page 113

Acoustic doppler flow meters
Hide thumbs Also See for ADFM Pro20:
Table of Contents

Advertisement

Compliance Statements
DECLARATION OF CONFORMITY
Application of Council Directive:
Equipment Type/Environment:
Standards to which Conformity is Declared:
Standard
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-11
CISPR11/
EN 55011
EN61000-3-2, 3-3
*Unit is susceptible to ESD. In dry environments (<40% humidity), user must discharge themselves to earth before touching front
panel to prevent program lock-up.
**Unit's flow sensor/cable is susceptible to RF. Unit must not be located near an RF source (radio/TV tower) to prevent erroneous
flow/depth measurements.
***Unit is susceptible to AC line transients and/or surges. If program lock-up occurs, unit's wall mount power supply must be
connected to an AC power conditioner or operated on its internal batteries.
We, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) and
Standards as of July 5, 2007
William Foster
USA Representative
William Foster
Director of Engineering
Teledyne Isco, Inc.
4700 Superior Street
Lincoln, Nebraska 68504
Phone: (402) 464-0231
Fax: (402) 464-4543
60-7102-003
Rev. A
Manufacturer's Name:
Manufacturer's Address:
Trade Name/Model No:
Year of Issue:
Description
Electrostatic Discharge
Radiated RF Immunity
Electrical Fast Transient
Surge on AC Lines
Conducted RF on AC lines
AC Dips and Short Interruptions
RF Emissions
Harmonic, Flicker
2004/108/EC -The EMC Directive
Teledyne Isco, Inc.
4700 Superior, Lincoln, Nebraska 68504 USA
Mailing Address: P.O. Box 82531, Lincoln, NE 68501
Laboratory Equipment for Light Industrial/Commercial Environments
Pro20 and Hot Tap Sensor
2007
EN 61326:1998 EMC Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use
Severity Applied
Level 2 - 4kV contact discharge
Level 3 - 8kV air discharge
80 MHz to 1000MHz 80% AM at 1kHz
Level 1 – 10V/m
Level 2 – 2kV on AC lines
2kV L-Gnd, 1KV L-L
150 kHz to 80 MHz,
3V rms, 80% modulated
0.5 Cycle, each polarity/100%
Group 1, Class A Industrial, Scientific, and
Medical Equipment
Performance Criteria
C*
B**
C***
C***
B**
A
Passes
Passes

Advertisement

Table of Contents
loading

This manual is also suitable for:

Adfm hot tap

Table of Contents