Table of Contents
Advertisement
ADFM® Flow Meter
Section 2 Setup and Installation
Measurements
Figure 2-3 Flowlink Measurements tab
2-4
While connected, Flowlink continually polls the site for real-time
readings. The Measurements tab displays the real-time readings,
as well as test data, in the Output window.
Diagnostic tests are selectable from the buttons to the left of the
screen. The results of each test are displayed and recorded in the
station's Log File.
Note
The "Bench Test" function is for diagnostic purposes and is not
required for routine operation. If for any reason the Bench Test
is performed, regardless of the time interval between tests,
Retrieve and save all recorded data before it is performed
again. Prior to redeployment, select "Erase Recorder" and
then "Restart."
Advertisement
Table of Contents
Troubleshooting
