Keyless Operation System - Mitsubishi ECLIPSE CROSS 2017 Owner's Manual

Keyless operation system*

4. Remove the old battery.
5. Install a new battery with the + side (B)
up.
3
Keyless entry key
Keyless operation key
6. Close the key case firmly.
7. Attach the screw (A) removed in step 1.
(Keyless entry key only)
8. Install the emergency key removed in
step 2.
(Keyless operation key only)
3-08 Locking and unlocking
9. Check the keyless entry system to see
that it works.
Keyless operation system*
+ side
The keyless operation system allows you to
lock and unlock the doors and tailgate and
start the engine simply by carrying the key-
- side
less operation key with you.
The switches on the keyless operation key
Coin type can also be used as the key switch of keyless
battery
entry system.
CR1620
Refer to "Starting and stopping the engine"
on page 6-19.
Refer to "Keyless entry system" on page
3-04.
+ side
The driver should always carry the keyless
operation key. This key is necessary for lock-
- side
ing and unlocking the doors and tailgate,
starting the engine and otherwise operating
the vehicle, so before locking and leaving the
Coin type
vehicle, be sure to check that you have the
battery
CR2032
keyless operation key.
E00305602113
OGKE18E1
WARNING
l
People with implantable cardiac pace-
makers or implantable cardiovascular-de-
fibrillators should not go near the exterior
transmitters (A) or the interior transmit-
ters (B). The radio waves used by the key-
less operation system could adversely af-
fect implantable cardiac pacemakers or
implantable cardiovascular-defibrillators.