Hill Start Assist - Mitsubishi ECLIPSE CROSS 2017 Owner's Manual

NOTE
• When the system detects the vehicle slid-
ing down a slope.
If the Electric parking brake cannot be ap-
plied automatically due to the system mal-
function, the message will appear on the
information screen in the multi informa-
tion display. Depress the brake pedal.
NOTE
l
If the ignition switch is turned to the
"LOCK" position or the operation mode is
put in OFF with the selector lever in any po-
sition other than "P" (Park) position, the
message may appear on the information
screen in the multi-information display.
If the message appears, shift the selector lev-
er to the "P" (Park) position while depress-
ing the brake pedal.
To start the vehicle
Depress the acceleration pedal with the selec-
tor lever in any position other than "P" (Park)
or "N" (Neutral).
The brakes are released, and the brake auto
hold indication lamp in the instrument cluster
will go off.
To turn off brake auto hold
Press the brake auto hold switch to turn off
the brake auto hold. The indication lamp on
the switch goes off.
OGKE18E1

Hill start assist

If you want to turn off the system while the
brake auto hold indication lamp is illumina-
ted, press the switch while depressing the
brake pedal.
NOTE
l If the brake auto hold system is turned off
without the brake pedal being depressed, a
buzzer will sound and the message will ap-
pear on the information screen in the multi
information display.
Hill start assist
The hill start assist makes it easy to start off
on a steep uphill slope by preventing the ve-
hicle from moving backwards. It keeps the
braking force for approximately 2 seconds
when you move your foot from the brake
pedal to the accelerator pedal.
Starting and driving
6
E00628001442
6-47