Mitsubishi ECLIPSE CROSS 2017 Owner's Manual page 119

3. Press the switch or switch to select
the sound, and then press the
confirm the setting.
The setting is changed to the selected
condition.
NOTE
l The operation sound setting only deactivates
the operation sound of the multi-information
display switches and rheostat illumination
button. The warning display and other
sounds cannot be deactivated.
Changing the time until "REST
REMINDER" is displayed
The time until the display appears can be
changed.
1. Switch to the function setting screen.
Refer to "Changing the function set-
tings" on page 5-13.
2. Press the switch or
switch to times to switch to the "REST REMIND-
ER" screen. Then, press the
switch to the setting selection screen.
E00523501858
3. Press the switch or
the time, and then press the
confirm the setting. The setting is
changed to the selected time.
NOTE
l The drive time is reset when the ignition
switch is turned off or the operation mode is
put in OFF.
Changing the turn-signal sound
It is possible to change the turn-signal sound.
1. Switch to the function setting screen.
Refer to "Changing the function set-
tings" on page 5-13.
switch several 2. Press the
switch to
switch to select
switch to 3. Press the
Changing the instant fuel con-
sumption display
It is possible to change the bar graph setting
of the instant fuel consumption display.
E00529101508
1. Switch to the function setting screen.
OGKE18E1
Multi-information display
switch or switch several
times to switch to the "TURN SIGNAL
SOUND" screen. Then, press the
switch to switch to the setting selection
screen.
switch or switch to select
the sound, and then press the
confirm the setting.
The setting changes to the selected turn-
signal sound.
Refer to "Changing the function set-
tings" on page 5-13.
Instruments and controls
5
switch to
E00529201424
5-19