Turn-Signal Lever; Hazard Warning Flasher Switch - Mitsubishi ECLIPSE CROSS 2017 Owner's Manual

Turn-signal lever

Turn-signal lever
5
1- Turn-signals
When making a normal turn, use posi-
tion (1). The lever will return automati-
cally when cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly to
change a lane, the turn-signal lamps and
indication lamp in the instrument cluster
will only flash while the lever is operat-
ed.
Also, when you move the lever to (2)
slightly then release it, the turn-signal
lamps and indication lamp in the instru-
ment cluster will flash 3 times.
5-64 Instruments and controls
NOTE
l
If the lamp flashes unusually quickly, the
E00506503017
bulb in a turn-signal lamp may have burned
out. We recommend you to have the vehicle
inspected.
l It is possible to activate the following func-
tions.
• Flashing of the turn-signal lamps when
the lever is operated with the ignition
switch or the operation mode is in ACC.
• Deactivate the turn-signal lamp 3-flash
function for lane changes
• The time required to operate the lever for
the 3-flash function can be adjusted.
For further information, we recommend
you to consult a MITSUBISHI MOTORS
Authorized Service Point.
On vehicles equipped with the Smart-
phone Link Display Audio or the
MITSUBISHI Multi-Communication Sys-
tem (MMCS), screen operations can be
used to make the adjustment. Refer to the
separate owner's manual for details.
l It is possible to change the tone of a sound-
ing buzzer as the turn-signal lamps flash.
Refer to "Changing the turn-signal sound"
on page 5-19.
Hazard warning flasher
switch
Use the hazard warning flasher switch when
the vehicle has to be parked on the road for
any emergency.
OGKE18E1
The hazard warning flashers can always be
operated, regardless of the ignition switch po-
sition or the operation mode.
Push the switch to turn on the hazard warning
flashers, all turn-signal lamps flash continu-
ously.
To turn them off, push the switch again.
NOTE
l As your vehicle is equipped with the emer-
gency stop signal system, while the hazard
warning lamps are blinking due to having
manually pushed the switch, the emergency
stop signal system does not operate.
Refer to "Emergency stop signal system" on
page 6-49.
E00506602330