Engine Switch - Mitsubishi ECLIPSE CROSS 2017 Owner's Manual

Engine switch*

ACC power auto-cutout func-
tion
After approximately 30 minutes has elapsed
with the ignition switch in the "ACC" posi-
tion, the function automatically cuts out the
power for the audio system and other electric
devices that can be operated with that posi-
tion.
6
When the ignition switch is turned from the
"ACC" position, the power is supplied again
to those devices.
NOTE
l It is possible to modify functions as follows:
• The time until the power cuts out can be
changed to approximately 60 minutes.
• The ACC power auto-cutout function can
be deactivated.
The ACC power auto-cutout function can
be deactivated.
For details, we recommend you to consult
a MITSUBISHI MOTORS Authorized
Service Point.
On vehicles equipped with the Smart-
phone Link Display
MITSUBISHI Multi-Communication Sys-
tem (MMCS), screen operations can be
used to make the adjustment.
Refer to the separate owner's manual for
details.
6-14 Starting and driving
NOTE
l
When ACC power supply automatic stop,
the steering wheel can't lock and you can't
E00620301292
lock and unlock the doors by the keyless en-
try key and keyless operation key.
To remove the key
On vehicles equipped with a M/T, when re-
moving the key, push the key in at the
"ACC" position and keep it depressed until it
is turned to the "LOCK" position and remove
it.
On vehicles equipped with CVT, when re-
moving the key, first set the selector lever to
the "P" (PARK) position, and push the key in
at the "ACC" position and keep it depressed
until it is turned to the "LOCK" position, and
remove it.
Audio and
OGKE18E1
CAUTION
l
Do not remove the ignition key from the ig-
nition switch while driving. The steering
wheel will be locked, causing loss of con-
trol.
l If the engine is stopped while driving, the
brake servomechanism will cease to function
and braking efficiency will deteriorate. Also,
the power steering system will not function
E00620401639
and it will require greater manual effort to
operate the steering.
l
Do not leave the key in the "ON" position
for a long time when the engine is not run-
ning, doing so will cause the battery to be
discharged.
l Do not turn the key to the "START" position
while the engine is running. Doing so could
damage the starter motor.
Engine switch*
In order to prevent theft, the engine will not
start unless a preregistered keyless operation
key is used. (Engine immobilizer function)
E00631801590