Mitsubishi ECLIPSE CROSS 2017 Owner's Manual page 168

Wiper and washer switch
NOTE
• When the wipers do not operate even
though it is raining.
l The wipers may automatically operate when
things such as insects or foreign objects are
affixed to the windscreen on top of the rain
sensor or when the windscreen is frozen.
5 Objects affixed to the windscreen will stop
the wipers when the wipers cannot remove
them. To operate the wipers again, move the
lever in the "LO" or "HI" position.
Also, the wipers may operate automatically
due to strong direct sunlight or electromag-
netic wave. To stop the wipers, place the
lever in the "OFF" position.
l Contact a MITSUBISHI MOTORS Author-
ized Service Point when replacing the wind-
screen or reinforcing the glass around the
sensor.
5-68 Instruments and controls
To adjust the sensitivity of the
rain sensor
With the lever in the "AUTO" position, it is
possible to adjust the sensitivity of the rain
sensor by turning the knob (B).
"+"- Higher sensitivity to rain
"-"- Lower sensitivity to rain
NOTE
l It is possible to activate the following func-
tions.
• Automatic operation (rain droplet sensi-
tive) can be changed to intermittent opera-
tion (vehicle-speed sensitive).
OGKE18E1
NOTE
• Automatic operation (rain droplet sensi-
tive) can be changed to intermittent opera-
tion (except vehicle-speed sensitive).
For further information, we recommend
you to consult a MITSUBISHI MOTORS
Authorized Service Point.
On vehicles equipped with the Smart-
phone Link Display Audio or the
MITSUBISHI Multi-Communication Sys-
tem (MMCS), screen operations can be
used to make the adjustment. Refer to the
separate owner's manual for details.
Misting function
Move the lever in the direction of the arrow
and release, to operate the wipers once.
Use this function when you are driving in
mist or drizzle.