Mitsubishi ECLIPSE CROSS 2017 Owner's Manual page 22

Table of Contents

Advertisement

Quick guide
1
4. Navigation information display screen*
Refer to "Head Up Display (HUD)" on
page 5-50.
S-AWC (Super-All Wheel Con-
trol)*
S-AWC is an integrated vehicle dynamics
control system that helps enhance driving
performance, cornering performance, and ve-
hicle stability over a wide range of driving
conditions through integrated management of
the electronically controlled 4WD, the AYC
(Active Yaw Control), the ABS and the ASC.
S-AWC con-
trol mode
AUTO mode applied to
dry pavement road and wet
road, etc.
This mode controls driv-
ing/ braking torque be-
tween front right and front
AUTO
left wheel and between
front and rear wheel ac-
cording to the driving con-
dition, and achieves low
fuel consumption and agile
driving.
1-20
Overview/Quick guide
S-AWC con-
trol mode
SNOW
E08501900141
GRAVEL
S-AWC drive mode-selector
Function
The drive mode can be switched by pressing
the switch while the ignition switch is in the
"ON" position or the operation mode is in
ON.
Function
This mode is chiefly suita-
ble for the snow road.
Stability improves on a
slippery road.
High traction mode.
This mode excels at rough
road driving and escape
from stuck conditions, in
addition, realizes strong
4WD driving from low
speed to high speed on or-
dinary road.
OGKE18E1
Refer to "S-AWC (Super-All Wheel Con-
trol)" on page 6-37.

Advertisement

Table of Contents
loading

Table of Contents