Multi Around Monitor - Mitsubishi ECLIPSE CROSS 2017 Owner's Manual

Multi Around Monitor*

NOTE
• When there is an upward slope at the
back.
6
A - Actual objects
B - Objects shown on the screen
6-116 Starting and driving
NOTE
l
The reference lines for distance and vehicle
width are intended to indicate the distance to
a flat object such as a level, flat road surface.
This may make the distance to a projecting
object shown on the screen differ from the
actual distance to the projecting object. Do
not use them as a guide for distances to solid
objects.
Example: On the screen the point B appears
the nearest, then the point C and A in order
of distance. The points A and B actually are
the same distances from the vehicle, and the
point C is farther off than the points A and
B.
Check surroundings for safety.
OGKE18E1
Multi Around Monitor*
The Multi Around Monitor is a system that
shows the view combined with four cameras,
i.e., "Front-view camera", "Side-view cam-
eras (right and left)" and "Rear-view camera"
on the DISPLAY AUDIO, the Smartphone
Link Display Audio or the MITSUBISHI
Multi-Communication System (MMCS). It
assists drivers to park their vehicles in park-
ing spaces and to parallel park their vehicles.
CAUTION
l The Multi Around Monitor is an assistance
system that enables the driver to check the
safety around the vehicle.
Its range of view is limited, so you should
not overly depend on it. Please drive just as
carefully as you would if the vehicle did not
have the Multi Around Monitor.
l Be sure to visually confirm safety around the
vehicle with your own eyes. Especially, the
four corners of the vehicle become blind
spots where an object is not displayed on the
Multi Around Monitor. Do not depend en-
tirely on the Multi Around Monitor.
l Do not use the Multi Around Monitor with
the door mirrors folded in and/or with the
doors and/or the tailgate open. It will prevent
the Multi Around Monitor from displaying
the appropriate range.
E00645000189