Mitsubishi ECLIPSE CROSS 2017 Owner's Manual page 241

CAUTION
• Do not cover the sensor mounted area
(shaded area as shown in the illustration)
with a sticker, licence plate or anything
such as a grill guard, etc.
• The sensor front cover should not be
modified or painted.
• Avoid using different size tyres from
those specified and maintain even tyre
wear.
• Do not modify the suspension of your ve-
hicle.
l When the cover in front of the sensor or the
sensor itself is deformed by an accident,
please do not use the ACC and contact a
MITSUBISHI MOTORS Authorized Serv-
ice Point.
When ACC detects no vehicle
in front within the set distance
Your vehicle runs at a speed to which you
set.
It is possible to set the speed between ap-
proximately 30 to 180 km/h (20 to 110 mph).
NOTE
l If the vehicle speed exceed the set speed on
down slope, the system automatically ap-
plies the brake to maintain the vehicle speed.
l When depressing the brake pedal while auto-
matic brake is applied, the brake pedal is felt
solidly, but it is not abnormal. You can more
depress the pedal and it provides greater
braking force.
l Sound is heard while automatic brake, but it
is operated a brake control and not abnor-
mal.
When ACC detects a vehicle in
front within the set distance
The ACC makes control to maintain a fol-
lowing distance (time gap) matched with the
vehicle speed between your vehicle and a ve-
hicle in front while also activating brakes as
necessary.
OGKE18E1
Adaptive Cruise Control System (ACC)*
If the vehicle in front stops, the ACC reacts
to it by stopping your vehicle.
When the ACC system enters the stationary
E00638100087
vehicle hold state after the vehicle stops,
"HOLD" appears.
While the ACC system is in the stationary
vehicle hold state, if it is possible to resume
following the vehicle in front because it has
started moving, "ACC READY TO RE-
SUME" will appear on the information
screen of the multi-information display. To
start moving again, press the switch or de-
press the accelerator pedal.
E00638000204
WARNING
l Never leave your vehicle while the ACC
system is in the stationary vehicle hold
state. When leaving the vehicle, apply the
parking brake and move the selector lever
to the "P" (Park) position.
Starting and driving
6
6-67