Making A Luggage Area - Mitsubishi ECLIPSE CROSS 2017 Owner's Manual

CAUTION
l
The shape and size of the head restraint dif-
fers according to the seat. Always use the
correct head restraint provided for the seat
and do not install the head restraint in the
wrong direction.
To remove
Lift the head restraint with the height adjust-
ing knob (A) pressed in.
NOTE
l If a front seat head restraint contacts the
headliner and cannot be removed, tilt the
seatback rearward slightly.
Refer to "Front seats" on page 4-02.
l To remove the head restraint from a rear out-
board seat, tilt the seatback forward slightly.
Refer to "Rear seats" on page 4-03.
To install
NOTE
l Before installing the head restraint to a rear
outboard seat, tilt the seatback forward
slightly.
Refer to "Rear seats" on page 4-03.
Confirm that the head restraint is facing the
correct direction, and then insert it into the
seatback while pressing the height adjusting
knob (A) in the direction indicated by the ar-
row.
The head restraint stalk with the adjustment
notches (B) must be installed in the hole with
the adjusting knob (A).
OGKE18E1

Making a luggage area

CAUTION
l
Confirm that the height adjusting knob (A)
is correctly adjusted as shown in the illustra-
tion, and also lift the head restraints to en-
sure that they do not come out of the seat-
back.
Making a luggage area
To create luggage space, you can fold the
rear seats.
CAUTION
l Do not stack luggage above the seatback
height. Secure the luggage firmly.
Serious accidents could result due to unre-
strained objects entering the passenger com-
partment during sudden braking.
l When folding the seat, be sure not to catch
your hand or leg.
Seats and seat belts
4
E00403401528
4-07