Mitsubishi ECLIPSE CROSS 2017 Owner's Manual page 316

Dual-zone automatic climate control air conditioning*
To control the driver's side and
the passenger's side tempera-
ture independently
When the indication lamp (A) goes off by
pressing the passenger's side temperature
control switch (B) or the SYNC switch, the
driver's side and the passenger's side temper-
ature can be controlled independently.
7
NOTE
l When the indication lamp (A) comes on by
pressing the SYNC switch, the passenger's
side temperature will be controlled to the
same setting temperature as the driver's side.
When the indication lamp (A) illuminates, if
the driver's side temperature control switch
is pressed, the passenger's side setting tem-
perature will be synchronized to the driver's
side.
7-14 For pleasant driving
Switching the air conditioning
system ON/OFF
Press the switch to turn the air conditioner
E00773600080
on, the " " indicator (A) will be shown in
the display.
Press the switch again to switch it off.
Switching outside air and recir-
culated air
To change the air selection, simply press the
air selection switch.
l Outside air: Indication lamp (A) is OFF
Outside air is introduced into the passen-
ger compartment.
OGKE18E1
l
Recirculated air: Indication lamp (A) is
ON
Air is recirculated inside the passenger
E00774100082
compartment.
CAUTION
l Normally, use the outside position to prevent
the windows from fogging up.
Use of the recirculation position for exten-
ded time may cause the windows to fog up.
Switch to the outside position periodically to
increase ventilation.
E00773900070
NOTE
l
If effective cooling performance is desired,
use the recirculation position.
l When pressing the AUTO switch after man-
ual operation, the air selection switch is also
controlled automatically.