Mitsubishi ECLIPSE CROSS 2017 Owner's Manual page 324

Customizing the air conditioning
Item
Setting temperature
7
*1
: Refer to Smartphone Link Display Audio instruction for procedure details.
*2
: Refer to MMCS instruction for procedure details.
*3
: When the demister switch is pushed, automatically switch to refresh mode for preventing fog of the window even if the air conditioner is set
to Manual.
*4
: When the demister switch is pushed, the air conditioner is automatically switched to ON mode for preventing fog of the window even if the
air conditioner is set to Manual.
*5
: During economical driving, you may feel that the air conditioner does not work sufficiently because the operation of the air conditioner is
controlled.
Customizing the automatic cli-
mate control panel
A setting can be changed by holding down
*1
the switch for approximately 10 seconds or
more.
7-22 For pleasant driving
Setting content Factory setting
When you feel
that it is hot or
cold to the setting
temperature, it is
Normal
possible to adjust
so that you can
feel more com-
fortable.
l
When the setting is changed from enable
to disable 3 sounds are emitted and the
indicator
E00778000021
*1
In case of A/C switch control customizing,
the A/C switch is appropriated.
In case of recirculation control customizing, the
air selection switch is appropriated.
Smart phone
Automatic cli-
Link Display
mate control
panel
Audio
–
*2
flashes three times.
OGKE18E1
Modification method
MITSUBISHI
Multi-Commu-
nication System
thorized Service
*1
*2
(MMCS)
– –
MITSUBISHI
MOTORS Au-
Point
○