Mitsubishi ECLIPSE CROSS 2017 Owner's Manual page 141

Screen
Navigation information dis-
play*
On vehicles equipped with the MITSUBISHI
Multi-Communication System (MMCS), the
following information on navigation will be
displayed when guidance location such as
junction and destination is approached after
l On vehicles with CVT, the engine was not
automatically started by the Auto Stop &
Go (AS&G) system.
l On vehicles with M/T, the engine was not
automatically started by the Auto Stop &
Go (AS&G) system.
you set the destination and started the route
guidance.
E00531401087
1- Guidance display
Indication lamp, warning lamp, and information screen display list
Cause
l
Direction of vehicle travel (Example)
OGKE18E1
Solution (Reference)
Refer to "Auto Stop & Go (AS&G) sys-
tem" on page 6-24.
Shows the direction of vehicle travel and
the guidance location.
Destination Ferry terminal Tollbooth
2- Remaining distance display
Shows the distance to the location where
the guidance is displayed.
Instruments and controls
5
Intermediate
destination
(Example)
5-41