Mitsubishi ECLIPSE CROSS 2017 Owner's Manual page 365

Enabling and disabling the
voice model and retraining
You can turn a voice model registered with
the speaker enrollment function on and off
whenever you want.
You can also retrain the system.
Use the following procedure to perform these
actions.
1. Press the SPEECH button.
2. Say "Voice training".
3. If you have completed a speaker enroll-
ment process once already, the voice
guide will say either "Enrollment is ena-
bled. Would you like to disable or re-
train?" or "Enrollment is disabled.
Would you like to enable or retrain?"
4. When enrollment is "enabled," the voice
model is on; when enrollment is "disa-
bled," the voice model is off. Say the
command that fits your needs.
Say "Retrain" to start the speaker enroll-
ment process and recreate a new voice
model. (Refer to "Speaker enrollment"
on page 7-62.)
Connecting the Bluetooth
interface and Bluetooth
vice
E00727600096
Before you can make or receive hands-free
calls or play music using the Bluetooth
interface function, you must pair the Blue-
®
tooth device and Bluetooth
NOTE
l Pairing is required only when the device is
used for the first time. Once the device has
been paired with the Bluetooth
face, all you need is to bring the device into
the vehicle next time and the device will
connect to the Bluetooth
matically (if supported by the device). The
device must have Bluetooth
connect.
Up to 7 Bluetooth
®
with the Bluetooth
If multiple paired Bluetooth
available in the vehicle, the cellular phone or
music player most recently connected is auto-
matically connected to the Bluetooth
terface.
You can also change a Bluetooth
be connected.
To pair
®
2.0
®
de-
To pair a Bluetooth
tooth
lowing 2 methods (Type 1 or Type 2).
E00760601865
Pairing procedure - Type 1*
®
2.0
®
2.0 interface.
®
2.0 inter-
®
2.0 interface auto-
®
turned ON to
®
devices can be paired
2.0 interface.
®
devices are
®
2.0 in-
®
device to
OGKE18E1
®
Bluetooth 2.0 interface*
®
device with the Blue-
®
2.0 interface, use either one of the fol-
1. Stop your vehicle in a safe area, put the
gearshift lever (M/T) in the "N" (Neu-
tral) position, or the selector lever (CVT)
in the "P" (PARK) position, and apply
the parking brake.
NOTE
l ®
You cannot pair any Bluetooth
®
the Bluetooth 2.0 interface unless the vehi-
cle is parked. Before pairing a Bluetooth
®
device with the Bluetooth 2.0 interface,
confirm that the vehicle is parked in a safe
location.
2. Press the SPEECH button.
3. Say "Setup."
4. Say "Pairing Options."
5. The voice guide will say "Select one of
the following: pair, edit, delete, or list."
Say "Pair."
For pleasant driving
7
device with
®
7-63