Mitsubishi ECLIPSE CROSS 2017 Owner's Manual page 105

Information screen (when the
ignition switch is turned from
the "LOCK" position to the
"ON" position or the operation
mode is changed from OFF to
ON)
When the ignition switch is turned to the
"ON" position or the operation mode is put in
ON, the display screen switches in the fol-
lowing order.
*: When the inspection time has arrived
1. Screen when the ignition switch or the
operation mode is OFF
2. System check screen ® p. 5-10
3. Screen when the ignition switch or the
operation mode is ON
4. Service reminder ® p. 5-09
Information screen (when the
ignition switch or the operation
mode is ON)
Press the switch or
display screen in the following order.
E00520702188
1
* : When there is no warning display
2
* : When there is a warning display
1- Tripmeter
® p. 5-08
2- Tripmeter
3- Driving range display ® p. 5-10
4- Average
E00521102062
switch to switch the
5- Average speed display ® p. 5-11
6- Auto Stop & Go (AS&G) monitor
7- S-AWC (Super-All Wheel Control) op-
8- Service reminder ® p. 5-09
9- Function setting screen ® p. 5-13
10- Redisplay of a warning display screen
l
OGKE18E1
Multi-information display
® p. 5-08
ECO drive assist display ® p. 5-12
fuel consumption
® p. 5-11
ECO drive assist display ® p. 5-12
Instant fuel consumption
® p. 5-11
® p. 5-12
ECO score display ® p. 5-13
eration display* ® p. 6-39
® p. 5-06
NOTE
While driving, the service reminder are not
displayed even if you operate the multi-in-
formation display switches. Always stop the
vehicle in a safe place before operating.
Instruments and controls
display
5
display
5-05