Mitsubishi ECLIPSE CROSS 2017 Owner's Manual page 86

Child restraint
Installing a child restraint sys-
tem to the lower anchorage
(ISOFIX child restraint mount-
ings) and tether anchorage
4
Lower anchorage location
Your vehicle's rear seat is fitted with lower
anchorages for attaching a child restraint sys-
tem with ISOFIX mountings.
Tether anchorage locations
Your vehicle has two child restraint anchor-
age points on the backside of the rear seats.
4-22 Seats and seat belts
These are for securing a child restraint sys-
tem tether strap to each of the two rear seat-
ing positions in your vehicle.
E00408902336
WARNING
l Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used for
adult seat belts, harnesses, or for attach-
ing other items or equipment to the vehi-
cle.
CAUTION
l Do not sit in the centre seating position of
the rear seat when installing a child restraint
system on the left side of the rear seat. Be-
cause the child restraint interferes with the
seat belt, you cannot fasten the seat belt cor-
rectly.
OGKE18E1
Child restraint system with
ISOFIX mountings
The child restraint system is designed only
for seats that incorporate lower anchorages.
Retain the child restraint system using the
lower anchorages.
It is not necessary to retain the child restraint
system using the vehicle's seat belts.
A- Child restraint system connectors
To install
NOTE
l On vehicles with the cargo area cover, install
the cargo area cover in the rear position or
remove it.
Refer to "Cargo area cover" on page 7-88.