Mitsubishi ECLIPSE CROSS 2017 Owner's Manual page 125

Screen
Engine switch is pressed one time
Engine switch is pressed two times or more
Indication lamp, warning lamp, and information screen display list
Cause
l Although the engine switch was pressed,
the keyless operation key could not be de-
tected.
l The steering wheel is locked.
l The operation mode is in ACC and the se-
lector lever is in a position other than the
"P" (PARK) position.
OGKE18E1
Solution (Reference)
l Touch the keyless operation key to the en-
gine switch.
Refer to "If the keyless operation key is
not operating properly" on page 6-23.
l Press the engine switch while turning
steering wheel.
Refer to "Steering wheel lock" on page
6-17.
l Place the selector lever in the "P" (Park)
position to put the operation mode in
OFF.
Instruments and controls
5
5-25