Related Manuals for Fluke 416D
Summary of Contents for Fluke 416D
- Page 1 416D Laser Distance Meter Users Manual July 2008 © 2008 Fluke Corporation, All rights reserved. Specifications subject to change without notice. All product names are trademarks of their respective companies.
- Page 2 LIMITED WARRANTY AND LIMITATION OF LIABILITY Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is two years and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Fluke's opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling.
-
Page 3: Symbols Used In This Manual
Limits of use Intended Use Note: Also see section "Technical data". Permitted uses The Fluke 416D is designed for use in areas perma- nently habitable by humans, do not use the product • Measuring distances in explosion hazardous areas or in harsh environ- •... - Page 4 • To inform Fluke immediately if the equipment Responsibilities becomes unsafe. Responsibilities of the manufacturer of the orig- Overview inal equipment Fluke Corporation, P.O. Box 9090 Everett, WA (Fluke): Keypad Fluke is responsible for supplying the product, including the Users Manual and original accessories, See drawing {A}: in a completely safe condition.
-
Page 5: Operation
Note: If the instrument will not be used for a long Precautions: time, remove the batteries as a protection against Carry out periodic test measurements. corrosion. Particularly after the instrument has been subject to Fluke 416D Start up... -
Page 6: Switching On/Off
Setting the instrument measurements. Press long until the desired unit is displayed. Make sure the Fluke 416D optic is kept clean and that there is no mechanical damage to the bumpers. Possible units: CAUTION:... -
Page 7: Single Distance Measurement
See drawing {F}. e.g. the determination of room diagonals (maximum value) or horizontal distance (minimum value). Switching on continuous measurement (see above). The corresponding maximum and minimum values are displayed. Fluke 416D Measuring... -
Page 8: Addition / Subtraction
(e.g. height). The value is displayed in the primary display, the individually measured values secondary display line 1. are displayed in secondary display lines 1 and 2. The result of the area measurement is displayed in the primary display, the two previously measured Functions Fluke 416D... -
Page 9: Indirect Measurement
If the button is pressed for a long time while measuring a distance, maximum or minimum contin- The distance to be measured flashes in the symbol. uous measuring is activated. 1x briefly: takes a measurement of the distance. Fluke 416D Functions... -
Page 10: Switching Off The Beep
Error Hardware error Should this message seconds: remain active after switching the instru- The beep is switched off. ment off and on several To reactivate it, press and hold for 5 seconds. times, please contact the dealership Appendix Fluke 416D... -
Page 11: Technical Specifications
Instrument after 180 s other equipment. Illumination WARNING Fold-out endpiece The Fluke 416D conforms to the most stringent Battery life, up to Type 2 x AAA 5 000 measurements requirements of the relevant standards and regula- tions. -
Page 12: Fcc Statement (Applic. In U.s.)
FCC statement (applic. in U.S.) Laser classification This equipment has been tested and found to comply The Fluke 416D produces a visible laser beam which with the limits for a Class B digital device, pursuant to emerges from the front of the instrument. - Page 13 Do not use harsh cleaning agents or solutions. Disposal Do not dispose of this product as unsorted municipal waste. Go to Fluke's website for recycling information. All rights reserved for changes (drawings, descrip- tions and technical specifications).