Working With Sample Files - Pepperl+Fuchs VBG-ENXK20-DMD-EV Manual

AS-i 3.0 EtherNet/IP+Modbus TCP Gateway
Appendix, Examples
15.2.1

Working with sample files

!
Please unzip your "AS-i/Ethernet IP gateway with AS-i Scanner for Allen-Bra-
dley CompactLogix" sample file.
!
Please start the software RSLogix 5000.
!
Please open the file "F01_Module.ACD". This sample file contains a program
that shows you, how to use the command interface (mailbox).
!
If it is needed, please adjust your controller and the ip of your gateway.
!
Please look at the description of the controller tags, where you can find the
tag Mailbox1.
Here you can edit the command interface instructions. You can find an appropri-
ate description in the Mbx0Main routine in the Mailbox.
Further sample files:
F02_RD_RW.ACD, F03_Get_LAS.ACD, F04_READ_IDI.ACD,
F05_GET_DELTA.ACD, F06_GET_TECA.ACD,
F07_SET_LOS.ACD,
F09_GET_LCS.ACD,
F11_SafeDiagSort.ACD,
The task MainProgram of these examples shows, how to use some instructions of
the Command Interface with help of the task Mbx0Main.
DataExchange.ACD
This sample file contains a very simple program that shows you how to read and
write digital AS-interface inputs and outputs.
F08_GET_LOS.ACD,
F10_GET_LPF.ACD,
F12_ACYCLIC_TRANS.
105