System Setup Options; System Setup Main Screen; System Bios Screen - Dell EMC PowerEdge R620 Owner's Manual

<Esc>
<F1>

System Setup options

System Setup Main screen

NOTE: Press <Alt><F> to reset the BIOS or UEFI settings to their default settings.
Menu item Description
System BIOS This option is used to view and configure BIOS settings.
iDRAC Settings This option is used to view and configure iDRAC settings.
Device Settings This option is used to view and configure device settings.

System BIOS screen

NOTE: The options for System Setup change based on the system configuration.
NOTE: System Setup defaults are listed under their respective options in the following sections, where applicable.
Menu Item Description
System Information Displays information about the system such as the system model name, BIOS version, Service Tag, and so on.
Memory Settings Displays information and options related to installed memory.
Processor Settings Displays information and options related to the processor such as speed, cache size, and so on.
SATA Settings Displays options to enable or disable the integrated SATA controller and ports.
Boot Settings Displays options to specify the boot mode (BIOS or UEFI). Enables you to modify UEFI and BIOS boot settings.
Integrated Devices Displays options to enable or disable integrated device controllers and ports, and to specify related features and
options.
Serial Displays options to enable or disable the serial ports and specify related features and options.
Communication
System Profile Displays options to change the processor power management settings, memory frequency, and so on.
Settings
System Security Displays options to configure the system security settings like, system password, setup password, TPM security,
and so on. It also enables or disables support for local BIOS update, the power and NMI buttons on the system.
Miscellaneous Displays options to change the system date, time, and so on.
Settings
Moves to the previous page till you view the main screen. Pressing <Esc> in the main screen displays a
message that prompts you to save any unsaved changes and restarts the system.
Displays the System Setup help file.
NOTE: For most of the options, any changes that you make are recorded but do not take effect until
you restart the system.
Using the system setup and boot manager 21