Dell EMC PowerEdge R620 Owner's Manual page 123

Error Code Message Information
Details
Action
PCI1320
Message
LCD Message
Details
Action
PCI1342
Message
Details
Action
PCI1348
Message
LCD Message
Details
Action
PCI1360
Message
LCD Message
Details
Action
PDR0001
Message
LCD Message
Details
Action
PDR1016
Message
LCD Message
Details
Action
PST0128
Message
LCD Message
Details
System performance may be degraded, PCI device may fail to operate, or system may fail
to operate.
Cycle input power, update component drivers, if device is removable, reinstall the device.
A bus fatal error was detected on a component at bus <bus>device<device>function
<func>.
Bus fatal error on bus <bus> device <device> function <func>. Power cycle system.
System performance may be degraded, or system may fail to operate.
Cycle input power, update component drivers, if device is removable, reinstall the device.
A bus time-out was detected on a component at slot <number>.
System performance may be degraded, or system may fail to operate.
Cycle input power, update component drivers, if device is removable, reinstall the device.
A PCI parity error was detected on a component at slot <number>.
PCI parity error on slot <number>. Re-seat PCI card.
System performance may be degraded, or system may fail to operate.
Cycle input power, update component drivers, if device is removable, reinstall the device.
A bus fatal error was detected on a component at slot <number>.
Bus fatal error on slot <number>. Re-seat PCI card.
System performance may be degraded, or system may fail to operate.
Cycle input power, update component drivers, if device is removable, reinstall the device.
Fault detected on drive <number>.
Fault detected on drive <number>. Check drive.
The controller detected a failure on the disk and has taken the disk offline.
Remove and re-seat the failed disk. If the issue persists, see
Drive <number> is removed from disk drive bay <bay>.
Drive <number> removed from disk drive bay <bay>. Check drive.
The controller detected that the drive was removed.
Verify drive installation. Re-seat the failed drive. If the issue persists, see
No memory is detected.
No memory is detected. Inspect memory devices.
System BIOS was unable to detect memory in the system.
Getting Help.
Getting Help.
System messages 123