Disabling Forgotten Password - Dell EMC PowerEdge R620 Owner's Manual

Item Connector
14 J_CYC
15 CYC_ID
16 J_RISER_2A
17 J_RISER_1A
18 TOUCH POINT
19 J_RISER_2B
20 J_RISER_1B
21 J_STORAGE
22 J_SASX8
23 J_USB_INT
24 BAT
25 CPU2
26 B1, B5, B9, B2, B6, B10
27 J_FAN2U_7
28 J_FAN2U_6
29 J_FAN2U_5
30 J_FAN2U_4
31 A1, A5, A9, A2, A6, A10, B3, B7, B11, B4, B8, B12
32 J_FAN1U_3
33 J_BP1
34 J_FAN1U_2
35 J_FAN1U_1
36 A12, A8, A4, A7, A11, A3
37 J_CP
38 CPU1
39 J_FP_USB
40 J_BP_SIG1
41 J_BP_SIG0

Disabling forgotten password

The software security features of the system include a system password and a setup password. The password jumper enables or disables
password features and clears any password(s) currently in use.
1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2 Remove the system cover.
3 Move the jumper on the system board jumper from pins 4 and 6 to pins 2 and 4.
4 Install the system cover.
Description
System identification connector
System identification button
Riser 2 connector
Riser 1 connector
Touch point for holding system board
Riser 2 connector
Riser 1 connector
Storage controller card connector
SATA connector
Internal USB connector
Battery connector
Processor socket 2
Memory module sockets
Cooling fan connector
Cooling fan connector
Cooling fan connector
Cooling fan connector
Memory module sockets
Cooling fan connector
Backplane power connector
Cooling fan connector
Cooling fan connector
Memory module sockets
Control panel interface connector
Processor socket 1
Front panel USB connector
Backplane signal connector 1
Backplane signal connector 0
Jumpers and connectors 109