Dell EMC PowerEdge R620 Owner's Manual page 119

Error Code Message Information
LCD Message
Action
CPU0204
Message
LCD Message
Details
Action
CPU0700
Message
LCD Message
Details
Action
CPU0701
Message
LCD Message
Details
Action
CPU0702
Message
LCD Message
Details
Action
CPU <number> is absent. Check CPU.
Verify processor installation. If present, re-seat the processor.
CPU <number> <name> voltage is outside of range.
CPU <number> <name> voltage is outside of range. Re-seat CPU.
Voltages outside the allowable range may damage electrical components or may cause
the system to shutdown.
1 Turn off the system and remove input power for one minute.
2 Ensure the processor is seated correctly.
3 Reapply input power and turn on the system.
4 If the issue persists, see
CPU <number> initialization error detected.
CPU <number> initialization error detected. Power cycle system.
System BIOS was unable to initialize the processor.
1 Turn off the system and remove input power for one minute.
2 Ensure the processor is seated correctly.
3 Reapply input power and turn on the system.
4 If the issue persists, see
CPU <number> protocol error detected.
CPU <number> protocol error detected. Power cycle system.
System event log and operating system logs may indicate that the exception is external to
the processor.
1 Check system and operating system logs for exceptions. If no exceptions are found,
continue.
2 Turn off the system and remove input power for one minute.
3 Ensure the processor is seated correctly.
4 Reapply input power and turn on the system.
5 If the issue persists, see
CPU bus parity error detected.
CPU bus parity error detected. Power cycle system.
System event log and operating system logs may indicate that the exception is external to
the processor.
1 Check system and operating system logs for exceptions. If no exceptions are found,
continue.
Getting Help.
Getting Help.
Getting Help.
System messages 119