Other Information You May Need - Dell EMC PowerEdge R620 Owner's Manual

Power Indicator Condition
Pattern
Flashing green When hot-adding a power supply, this indicates that the power supply is mismatched with the other power supply
(in terms of efficiency, feature set, health status, and supported voltage). Replace the power supply that has the
flashing indicator with a power supply that matches the capacity of the other installed power supply.

Other Information You May Need

WARNING: See the safety and regulatory information that shipped with your system. Warranty information may be included
within this document or as a separate document.
• The Getting Started Guide provides an overview of setting up your system, and technical specifications. This document is available
online at dell.com/support/manuals.
• The rack documentation included with your rack solution describes how to install your system into a rack, if required.
• Any media that ships with your system that provides documentation and tools for configuring and managing your system, including
those pertaining to the operating system, system management software, system updates, and system components that you purchased
with your system.
• For the full name of an abbreviation or acronym used in this document, see the Glossary at dell.com/support/manuals.
NOTE: For the latest documentation updates, check Dell.com/support/manuals.
18 About your system
CAUTION: Combining AC and DC power supplies is not supported and triggers a mismatch.