Uefi Boot Menu; Embedded Systems Management; Idrac Settings Utility; Entering The Idrac Settings Utility - Dell EMC PowerEdge R620 Owner's Manual

Menu Item Description
Launch System Enables you to access the System Setup.
Setup
System Utilities Enables you to access the BIOS Update File Explorer, run the Dell Diagnostics program, and reboot the system.

UEFI Boot menu

Menu Item Description
Select UEFI Boot Displays the list of available UEFI boot options (marked with asterisks), select the boot option you wish to use and
Option press <Enter>.
Add Boot Option Adds a new boot option.
Delete Boot Option Deletes an existing boot option.
Boot From File Sets a one-time boot option not included in the boot option list.

Embedded systems management

The Dell Lifecycle Controller provides advanced embedded systems management throughout the lifecycle of the system. The Dell Lifecycle
Controller can be started during the boot sequence and can function independently of the operating system.
NOTE: Certain platform configurations may not support the full set of features provided by the Dell Lifecycle Controller.
For more information about setting up the Dell Lifecycle Controller, configuring hardware and firmware, and deploying the operating system,
see the Dell Lifecycle Controller documentation at Dell.com/idracmanuals.

iDRAC Settings utility

The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disable various
iDRAC parameters by using the iDRAC settings utility.
NOTE: Accessing some of the features on the iDRAC settings utility needs the iDRAC Enterprise License upgrade.
For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.

Entering the iDRAC Settings utility

1 Turn on or restart the managed system.
2 Press F2 during Power-on Self-test (POST).
3 On the System Setup Main Menu page, click iDRAC Settings.
The iDRAC Settings screen is displayed.

Changing the thermal settings

The iDRAC Settings utility enables you to select and customize the thermal control settings for your system.
1 Enter the iDRAC Settings utility.
2 Under iDRAC Settings > Thermal > User Option, select one of the following options:
32 Using the system setup and boot manager