Topics:
•
Front-panel features and indicators
•
Lcd panel features
•
Configuring iDRAC from the LCD panel
•
Diagnostic indicators
•
Hard-Drive indicator patterns
•
Back-panel features and indicators
•
NIC indicator codes
•
Power Indicator Codes
•
Other Information You May Need
Front-panel features and indicators
Figure 1. Front-panel features and indicators—8 hard drive system
Item
Indicator, Button, or Connector Icon
1
Power-on indicator, power
button
2
NMI button
3
System identification button
About your system
Description
The power-on indicator lights when the system power is on. The
power button controls the power supply output to the system.
NOTE:
On ACPI-compliant operating systems, turning off
the system using the power button causes the system to
perform a graceful shutdown before power to the system
is turned off.
Used to troubleshoot software and device driver errors when
running certain operating systems. This button can be pressed
using the end of a paper clip.
Use this button only if directed to do so by qualified support
personnel or by the operating system's documentation.
The identification buttons on the front and back panels can be used
to locate a particular system within a rack. When one of these
buttons is pressed, the LCD panel on the front and the system
status indicator on the back flashes blue until one of the buttons is
pressed again.
1
About your system
7