System Diagnostics Controls - Dell EMC PowerEdge R620 Owner's Manual

CAUTION: Use the embedded system diagnostics to test only your system. Using this program with other systems may cause
invalid results or error messages.
1 As the system boots, press F11.
2 Use the up and down arrow keys to select System Utilities > Launch Dell Diagnostics.
The ePSA Pre-boot System Assessment window is displayed, listing all devices detected in the system. The diagnostics starts
running the tests on all the detected devices.

System diagnostics controls

Menu Description
Configuration Displays the configuration and status of all detected devices.
Results Displays the results of all tests that are executed.
System health Provides the current overview of the system performance.
Event log Displays a time-stamped log of the results of all tests run on the system. This is displayed if at least one event
description is recorded.
106 Using system diagnostics