Dell EMC PowerEdge R620 Owner's Manual page 118

Error Code Message Information
Details
Action
BAT0002
Message
LCD Message
Details
Action
BAT0017
Message
LCD Message
Details
Action
CPU0000
Message
LCD Message
Details
Action
CPU0001
Message
LCD Message
Details
Action
CPU0005
Message
LCD Message
Details
Action
CPU0010
Message
Details
Action
CPU0023
Message
118 System messages
The operating system or an application failed to communicate within the time-out
period. The system was power-cycled.
Check the operating system, application, hardware, and system event log for exception
events.
The system board battery has failed.
The system board battery has failed. Check battery.
The system board battery is either missing or bad.
See Getting Help.
The <name> battery has failed.
The <name> battery has failed. Check battery.
The <name> battery is either missing, bad, or unable to charge due to thermal issues.
Check system fans. If the problem persists, see
CPU <number> has an internal error (IERR).
CPU <number> has an internal error (IERR).
System Event Log and Operating System Logs may indicate that the exception is external
to the processor.
Review System Event Log and Operating System Logs. If the issue persists, see
Help.
CPU <number> has a thermal trip (over-temperature) event.
CPU <number> has a thermal trip. Check CPU heat sink.
The processor temperature increased beyond the operational range.
Review the logs for fan failures. If no fan failures are detected, check inlet temperature (if
available) and reinstall processor heat sink. If the problem persists, see
CPU <number> configuration is unsupported.
CPU <number> configuration is unsupported. Check CPU or BIOS revision.
System is unable to boot or may run in a degraded state.
Review the technical specifications for supported processor types.
CPU <number> is throttled.
The CPU is throttled due to thermal or power conditions.
Review system logs for power or thermal exceptions.
CPU <number> is absent.
Getting Help.
Getting
Getting
Help.