Dell EMC PowerEdge R620 Owner's Manual page 8

Item Indicator, Button, or Connector Icon
4 USB connector (2)
5 Optical drive (optional)
6 vFlash media card slot
7 LCD menu buttons
8 LCD panel
9 Information tag
10 Video connector
11 Hard drives (8)
Figure 2. Front-panel features and indicators—10 hard drive system
Item Indicator, Button, or Connector Icon
1 Diagnostic indicators
2 System health indicator
8 About your system
Description
Press to toggle the system ID on and off. If the system stops
responding during POST, press and hold the system ID button for
more than five seconds to enter BIOS progress mode.
To reset the iDRAC (if not disabled in F2 iDRAC setup) press and
hold the button for more than 15 seconds.
Allows you to insert USB devices to the system. The ports are USB
2.0-compliant.
One optional SATA DVD-ROM drive or DVD+/-RW drive.
NOTE: DVD devices are data only.
Allows you to insert a vFlash media card.
Allows you to navigate the control panel LCD menu.
Displays system ID, status information, and system error messages.
The LCD lights blue during normal system operation. The LCD lights
amber when the system needs attention, and the LCD panel
displays an error code followed by descriptive text.
NOTE: If the system is connected to AC power and an
error is detected, the LCD lights amber regardless of
whether the system is turned on or off.
A slide-out label panel, which allows you to record system
information, such as Service Tag, NIC, MAC address, and so on as
per your need.
Allows you to connect a VGA display to the system.
Up to eight 2.5 inch hot-swappable hard drives.
Up to four 2.5 hot-swappable hard drives and up to two 2.5 inch
Dell PowerEdge Express Flash devices (PCIe SSDs).
Description
The diagnostic indicators light up to display error status.
The system health indicator blinks amber when a system fault is
detected.